Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.
IntervalFollow the matching normal/severe-use schedule in the linked manual; inspect sooner if symptoms appear.Verified
01 / Requirements
Configuration-specific service and fitment facts
These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
Coolant
Cooling-system capacity, no rear heater
8.5 US qtVerified
Coolant specification
Toyota Long Life Coolant or equivalent ethylene-glycol coolantVerified
Compatible products (1)
Urobolus may earn a commission from purchases made through these links. Affiliate disclosure
Toyota Genuine Long Life Antifreeze/Coolant Concentrate
Specified engine coolant · One gallon contains 3.785 L of concentrate, not ready-to-use coolant. Follow Toyota’s manual and the bottle’s dilution chart, using distilled or demineralized water. At a specified 50/50 mix, one gallon of concentrate plus one gallon of water makes about 7.57 L. Confirm required quantity, retained fluid and final concentration; do not pour the concentrate in undiluted.
Part number: 00272-1LLAC-01 · 1 US gallon (3.785 L), concentrate
Never open a hot pressurized cooling system. A total-system capacity is not necessarily the amount that drains during a routine change; follow the engine-specific bleeding procedure.
Service requirements
Check the reservoir cold. The selected vehicle has no optional rear heater: full-system capacity is 8.0 L. Mix compatible concentrate with demineralized or distilled water, normally 50%; Toyota allows 60% for very cold conditions and prohibits more than 70%. Determine the actual drain/refill amount and bleeding procedure separately.