2008 Honda S2000 / AP2 Base
Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.
← Back to specifications
These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
Use the stated oil grade and API certification. Replace the drain washer and filter, torque the drain bolt to 39 Nm, and confirm the final dipstick level and absence of leaks. A low oil-pressure warning that remains on after starting requires immediate engine shutdown.
Corroborated4 compatible productsReplace moisture-contaminated fluid using the specified fluid and bleed sequence.
CorroboratedMatch the installed bulb or fuse rating exactly and diagnose repeat failures before replacing again.
VerifiedInspect the belt under the OEM procedure and replace only when its condition requires it. This is not a timing-belt replacement interval.
CorroboratedReplace the heating/ventilation filter; it also serves the optional air-conditioning system.
CorroboratedInspect the element and air-box seal; shorten the interval in dusty use.
CorroboratedUse the specified premixed coolant and follow the model-year bleeding procedure.
CorroboratedCheck idle speed under Honda’s diagnostic procedure; this scheduled inspection does not call for a routine replacement part.
CorroboratedInspect the case, terminals, hold-down, and starting behavior before choosing the exact replacement type.
VerifiedChange quantity and application notes for the six-speed manual.
CorroboratedInspect both brake axles, parking-brake adjustment, steering joints/boots, suspension, driveshaft boots, brake hoses/lines, all fluid levels/condition, exhaust and fuel lines/connections. Repair findings require the matching service procedure.
CorroboratedFactory change quantity for the torque-sensing limited-slip differential.
CorroboratedUse only the specified plug type and verify the model-year torque procedure before installation.
CorroboratedStaggered factory sizes and the exact-axle replacement rule.
VerifiedFollow the engine-specific valve-clearance procedure and resealing requirements.
CorroboratedKeep the hood closed while the arms are raised. Release the blade lock and replace the worn insert or matching assembly; confirm it locks before use.
Corroborated