2007 Toyota Camry / Hybrid · Automatic (variable gear ratios) · 4 cyl · 2.4 L

Owner maintenance and common replacements

Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.

← Back to specifications

Configuration-specific service and fitment facts

These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.

Engine oil viscosity
0W-20 Verified0W-20 is the preferred grade. Consult this manual's conditions before using its 5W-20 alternative.
Engine oil specification
ILSAC multigrade engine oil Verified
Engine oil refill with filter
4.5 US qt VerifiedRefill with a new filter; confirm the final dipstick level.
Engine oil refill without filter
4.3 US qt Verified
Brake fluid
SAE J1703 / FMVSS 116 DOT 3 Verified
Coolant specification
Toyota Super Long Life Coolant Verified
Automatic transmission fluid
Toyota Genuine ATF WS VerifiedPower-split hybrid transaxle uses ATF WS, not belt-CVT fluid.
Oil filter applications
WIX 57145 / 57145XP Verified
Driver-side front blade application
Bosch EVO24 Verified
Passenger-side front blade application
Bosch EVO20 VerifiedFront pair for the original wiper arms. Rear blades, washer fluid and modified arms require separate review.
01

Engine oil and filter

Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.

Verified3 compatible products
02

12-volt battery

Inspect the case, hold-down and terminals. Confirm dimensions, polarity and venting before selecting a replacement battery.

Verified
05

Cabin air filter

Check reduced ventilation airflow and inspect the cabin filter where fitted. Follow the year-specific instructions for access and installation direction.

Verified
06

Engine air filter

Inspect the filter housing and replace the element on the applicable schedule, sooner in dusty use when the manual requires it.

Verified
08

Lights and fuses

Check exterior lights and use the manual's lamp and fuse diagrams to identify the failed circuit. A repeatedly blown fuse needs diagnosis.

Verified
09

Tires and rotation

Check cold pressures, tread wear and damage. Use the vehicle placard for the fitted tire size and load rather than the tire sidewall maximum.

Verified
10

Wiper blades and washer fluid

Replace damaged or streaking blades after checking that the glass and rubber are clean. Confirm the driver/passenger lengths and connector before ordering.

Verified