Engine oil and filter
Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.
Verified1 compatible products2017 Kia Sportage / FWD · Automatic (S6) · 4 cyl · 2.0 L · Turbo
Owner maintenance and common replacements
Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.
← Back to specificationsConfiguration-specific service and fitment facts
These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
- Automatic transmission fluid
- Approved ATF SP-IV: SK ATF SP-IV, MICHANG ATF SP-IV or NOCA ATF SP-IV Verified
- Brake fluid
- DOT 3 or DOT 4 Verified
- Coolant specification
- Phosphate-based ethylene-glycol coolant for an aluminum radiator; use the prescribed mixture Verified
- Engine oil refill with filter
- 5.1 US qt Verified
- Engine oil viscosity
- SAE 5W-30 preferred Verified
- Engine oil specification
- ACEA A5 or above VerifiedUse the exact approved specification. The manual wording does not establish interchangeability with every newer ACEA category.
- Engine coolant capacity
- 7.6 US qt VerifiedOwner-manual system capacity, not an established drain/refill quantity. The actual amount after draining depends on retained coolant; use the matching fill and bleed procedure.
- Cabin filters required
- 1 VerifiedOne cabin-filter element per normal housing replacement. No HEPA assembly or multi-filter package is inferred.
- Original tire pressure, front
- 35 psi Verified240 kPa (35 psi) is specified for front and rear at both normal load (up to three people) and maximum load. Match the original tire size and vehicle placard. This is not the compact-spare pressure.
- Original tire pressure, rear
- 35 psi Verified240 kPa (35 psi) is specified for front and rear at both normal load (up to three people) and maximum load. Match the original tire size and vehicle placard. This is not the compact-spare pressure.
- Original tire load and speed specification
- 245/45R19 98H VerifiedOriginal full-size tire load index and speed symbol. Use the matching vehicle placard and originally supplied size. The manual lists a wheel-lug torque range of 107–127 N·m, not a single fixed torque. Two compact-spare load-index rows remain unresolved and are not assigned.
- Oil filter applications
- K&N HP-1004 VerifiedOne filter per oil service. Manufacturer fitment is separate from oil specification, drain-plug washer and torque. The existing HP-1004 product record can be reused after the complete material set is reviewed.
- Engine air filter application
- K&N33-5046 VerifiedAftermarket K&N catalog application; Kia owner manual recommends a Kia genuine part and warns that a non-genuine part could damage the air-flow sensor. OEM disposable element must not be washed; follow the selected aftermarket manufacturer instructions separately.
- Cabin filter application
- K&N VF2062 VerifiedK&N manufacturer application for VF2062 reusable cabin filter. Quantity1 comes from Kia single-filter housing/replacement procedure, not retail pack size. Kia disposable schedule and K&N reusable refresh instruction remain separate.
- Front wiper set application
- K&N Edge92-2616,26-inch/16-inch pair VerifiedFront set only. Card does not independently assign driver/passenger sides or establish the rear blade.
- Front wheel
- 7.5J x 19 alloy VerifiedSelected US SX Turbo FWD, standard wheels and tires; with roof rails. Options can change applicability.
- Front tire
- P245/45R19 VerifiedSelected US SX Turbo FWD, standard wheels and tires; with roof rails. Options can change applicability.
- Rear wheel
- 7.5J x 19 alloy VerifiedSelected US SX Turbo FWD, standard wheels and tires; with roof rails. Options can change applicability.
- Rear tire
- P245/45R19 VerifiedSelected US SX Turbo FWD, standard wheels and tires; with roof rails. Options can change applicability.
Automatic transmission fluid
Match the fluid to the exact transmission, not just the vehicle model. A drain-and-refill amount differs from the total dry capacity.
VerifiedBrake fluid and inspection
Check the reservoir and inspect any low level, warning light or changed pedal feel before driving. Repeated topping-up is not a repair.
VerifiedCabin air filter
Check reduced ventilation airflow and inspect the cabin filter where fitted. Follow the year-specific instructions for access and installation direction.
VerifiedEngine air filter
Inspect the filter housing and replace the element on the applicable schedule, sooner in dusty use when the manual requires it.
VerifiedEngine coolant
Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.
VerifiedSpark plugs
Use the engine-specific plug type. Check the service schedule and inspect ignition faults before replacing parts.
VerifiedTires and rotation
Check cold pressures, tread wear and damage. Use the vehicle placard for the fitted tire size and load rather than the tire sidewall maximum.
VerifiedWiper blades and washer fluid
Replace damaged or streaking blades after checking that the glass and rubber are clean. Confirm the driver/passenger lengths and connector before ordering.
Verified