2005 Honda S2000 / Manual 6-speed · 4 cyl · 2.2 L

Owner maintenance and common replacements

Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.

← Back to specifications

Configuration-specific service and fitment facts

These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.

Engine oil with filter
5.1 US qt Verified
Engine oil viscosity
SAE 10W-30 preferred; SAE 5W-40 permitted below 0°F (-20°C) Verified
Driver-side front blade application
Bosch EVO16 Verified
Passenger-side front blade application
Bosch EVO20 VerifiedFront pair for the original wiper arms. Rear blades, washer fluid and modified arms require separate review.
02

Brake and clutch fluid

Replace with Honda Heavy Duty Brake Fluid DOT 3 and use the correct bleed sequence.

Verified
03

Brake pads, discs, hoses, and parking brake

Inspect front and rear friction parts, hoses, lines, and parking-brake adjustment.

Verified
04

Bulbs and fuses

Match the installed bulb or fuse rating exactly and diagnose repeat failures before replacing again.

Verified
05

Cabin air filter

Replace the dust and pollen filter from the owner-service access point.

Verified
06

Engine air filter

Replace the exact AP1 or AP2 air-cleaner element and keep the air-box seal clean.

Verified
07

Engine coolant

Use the specified Honda coolant and the model-year bleeding procedure only when the engine is cool.

Verified
08

Low-voltage battery

Inspect the case, terminals, hold-down, and starting behavior before choosing the exact replacement type.

Verified
09

Spark plugs

Use only the exact model-year plug specification and the manual's tightening procedure.

Verified
10

Tire pressure and wear

Inspect the staggered, directional tires without rotating them front-to-rear or side-to-side.

Verified