1991 Honda Civic / Automatic 4-speed · 4 cyl · 1.6 L

Owner maintenance and common replacements

Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.

← Back to specifications

Configuration-specific service and fitment facts

These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.

Engine oil viscosity
SAE 5W-30 recommended for fuel economy; select climate-appropriate viscosity from the original chart. VerifiedOriginal 1991 manufacturer specification. Current replacement-product suitability or supersession has not been established.
Engine oil specification
API SG detergent oil; energy-conserving SG oil recommended. VerifiedOriginal 1991 manufacturer specification. Current replacement-product suitability or supersession has not been established.
Engine oil refill with filter
3.7 US qt VerifiedRefill reference only; finish by the manual level-check procedure. A complete purchase set is not established.
Coolant specification
Honda-recommended antifreeze/coolant for aluminum engines; mix 50/50 with low-mineral or distilled water. Do not mix coolant types. VerifiedOriginal 1991 manufacturer specification. Current replacement-product suitability or supersession has not been established.
Brake fluid
DOT3 or DOT4 from a sealed container, following the reservoir-cap specification. Verified
Automatic transmission fluid
Original specification: DEXRON II automatic transmission fluid. VerifiedOriginal 1991 manufacturer specification. Current replacement-product suitability or supersession has not been established.
Automatic transmission drain and refill
2.5 US qt VerifiedRefill reference only; finish by the manual level-check procedure. A complete purchase set is not established.
01

Engine oil and filter

Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.

VerifiedProduct compatibility review in progress
02

Automatic transmission fluid

Match the fluid to the exact transmission, not just the vehicle model. A drain-and-refill amount differs from the total dry capacity.

Verified
03

Brake fluid and inspection

Check the reservoir and inspect any low level, warning light or changed pedal feel before driving. Repeated topping-up is not a repair.

Verified
04

Engine air filter

The original replacement interval is recorded; exact filter fitment remains unverified.

Verified
05

Engine coolant

Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.

Verified
06

Spark plugs

The original replacement interval is recorded; plug part number, gap and torque remain unverified.

Verified
07

Timing belt and water-pump inspection

Track belt replacement by both age and mileage. This is an engine-specific workshop job, not a generic belt replacement procedure.

Verified
08

Tire inspection and rotation

Inspect tires and use the matching original rotation pattern. Pressure, size and wheel-torque applications remain unresolved.

Verified